Straight Shower Rod

Stainess steel straight rod.

Does not include flanges (Item # FLANGES-BS).

Packing Information is confirmed in the specification sheet link below.

CR570-60 - Bright Stainless Steel Straight Rod 60”W

CR570-36 - Bright Stainless Steel Straight Rod 36”W

CR570-72 - Bright Stainless Steel Straight Rod 72”W

CR570-84 - Bright Stainless Steel Straight Rod 84”W

CR570-60SS - Satin Stainless Steel Straight Rod 60”W

CR570-36SS - Satin Stainless Steel Straight Rod 36”W

CR570-72SS - Satin Stainless Steel Straight Rod 72”W

CR570-84SS- Satin Stainless Steel Straight Rod 84”W

Specification Sheet: kss-cr570_-spec_sheet.pdf

Contact a customer service representative if you have a special need. We can source custom solutions for your property!

Details

Tension Rod

Adjustable heavy steel tension rod. Rust resistant. 1" Diameter, rubber ends for suction hold.

Packed 6/case.

TR2440-1 - 24” - 40”W adjustable tension rod in color white

TR4272-1 - 42” - 72”W adjustable tension rod in color white

Contact a customer service representative if you have a special need. We can source custom solutions for your property!

Details

Safety Shower Rod Flanges

Shower rod flanges are fabricated from stainless steel and available with a bright polished or satin finish.

FLANGESBA-SS - Exposed Detachable Satin Finish Flanges for all Straight Stainless Steel Rods - This pair of "detachable" shower rod flanges is fabricated from stainless steel and has a #4 satin finish. The spring loaded design releases the shower rod when excessive downward force is applied to the shower rod. The flanges hold a 1 inch OD shower rod and are designed to mount with two (2) #10 oval head screws, which are not included. Please note that the shower rod must be purchased separately.

Details

Curved Shower Rod USA Made

CRUS60-BS - This heavy duty curved shower rod is fabricated from stainless steel with a bright polished finish. The unit includes both the shower rod as well as the mounting flanges, which are concealed by a snap-on cover. The rod is one-inch in diameter and fabricated from 18 gauge (.049) 304 series stainless steel tubing. It is 60 inches long and provides a six-inch offset at the center of the rod.  The mounting flanges are fabricated from 14 gauge, 304 series stainless steel and include a cover that snaps over the flange to conceal the mounting screws. The flange cover is fabricated from 22 gauge 304 series stainless steel and has a bright polished finish. Each flange has three mounting holes. Due to variations in applications, mounting hardware is not included. The shower rod is fixed in place using a set screw, which is provided.

CRUS60-SS - This heavy duty curved shower rod is fabricated from stainless steel with a #4 satin finish. The unit includes both the shower rod as well as the mounting flanges, which are concealed by a snap-on cover. The rod is one-inch in diameter and fabricated from 18 gauge (.049) 304 series stainless steel tubing. It is 60 inches long and provides a six-inch offset at the center of the rod.  The mounting flanges are fabricated from 14 gauge, 304 series stainless steel and include a cover that snaps over the flange to conceal the mounting screws. The flange cover is fabricated from 22 gauge 304 series stainless steel and has a #4 satin finish. Each flange has three mounting holes. Due to variations in applications, mounting hardware is not included. The shower rod is fixed in place using a set screw, which is provided.

Details

Shower Rod Flanges

Light Duty 1" Shower Rod Flange - .031 thick type 304 stainless steel formed one pc with (2) 3/16" holes formed countersunk for #10 oval head screw.

Holds a 1" diameter straight shower rod. Sold as a pair or a set in either satin stainless or bright stainless finishes.

For use with CR570 shower rods.

FLANGES-BS - Exposed Flanges for all Straight Bright Stainless Steel Rods

FLANGES-SS - Exposed Flanges for all Straight Satin Stainless Steel Rods

Details